Continuous level measurement

Technical characteristics
Application form

1. Ecologically safe radiation source.
2. High efficiency scintillation gamma detector.
3. Data processing block.

Non-contact level meters Ecophyspribor is the set of devices that intended for non-contact level measurement  of liquid or bulk materials behind the wall inside the tested vessel .

The absence of contact between device components and tested material allows to use the Ecophyspribor level indicators for the control of vessels filled with:

• corrosive, abrasive, aggressive, toxic, biology-hazard materials;
• molted and cryogenic materials;
• foams, suspensions, slurries, powders, pulps, charge.

Temperature and pressure inside the vessel can be of any value.

The principle of action is based on detection of the change of gamma-radiation from lengthy ecologically safe source caused by the  change of the tested material level.
Device blocks are maid hermetically sealed or explosion proof, are stable for vibrations and adapted for hard climatic conditions.
For different tasks a series of modifications is supposed.
To choose right solution and set of components  we recommend to fill in the application form.

print version