Density measurement

Technical characteristics
Application form

1. High efficiency scintillation gamma detector.
2. Ecologically safe radiation source.
3. Data processing block.

Non-contact density meters Ecophyspribor are the set of devices intended for non-contact density measurement of pulps and liquids in pipes (in the case of their total filling) and in various process vessels.
The absence of contact between device components and tested material allows to use the Ecophyspribor density meters to control vessels filled with:

• corrosive, abrasive, aggressive, toxic, biology-hazard materials;
• molted and cryogenic materials;
• foams, suspensions, slurries, powders, pulps, charges.

Temperature and pressure inside the vessel can be of any value.

The principle of action is based on detection of the change of gamma-radiation passed through tested material on its density.

Device blocks are maid hermetically sealed or explosion proof, are stable for vibrations and adapted for hard climatic conditions.

For different tasks a series of modifications is supposed.

To choose right solution and set of components  we recommend to fill in the application form.

print version